Concrete Admixtures
Concrete Protection Materials Concrete Repair Materials Flooring Materials Grouting & Anchoring Materials Waterproofing and Joint Sealants Dry-mixed Mortar Materials Exterior Insulation Finishing
MUHU (China) Construction Materials Co., Ltd.
Your current location:Home > Products > Waterproofing and Joint Sealants
PRODUCTS
Flex Coat of Cement Based Protective Coating
Product Name: Flex Coat of Cement Based Protective Coating
Type: JS
Package: 7.2kg/team

Acrylic Polymer Reinforced Flexible Waterproof Coating 
  JS Waterproofing Coating


■ Product Description

JS Waterproofing Coating comprises a two-component acrylic polymer modified cementitious coating supplied in ready to mix kits. JS Waterproofing Coating can be simply applied by stiff brush, roller, spray, or trowel to obtain the desired texture. It is available in Grey and White.

■ Standards Compliance
JS Waterproofing Coating complies with the requirements of the following standards: BS 6920: Part 1: 1988 ASTM C 29 ASTM D 638-02a

■ Typical Properties

■ Uses

★ Used as a waterproof coating for water tanks and reservoirs.
★ Used as a flexible coating to bridge shrinkage cracks.
★ Suitable to protect other cementitious substrates and masonry for new and existing structures.
★ Used for reprofiling concrete and masonry surfaces.

■ Typical Applications & Advantages
★ Waterproof suitable for water retaining structures.
★ To provide foundation protection. 
★ As a waterproof coating for roofs.
★ Impervious lining for water retaining structures.
★ As a backing to marble and granite to prevent water ingress and thus alleviate surface staining.
★ Protection of concrete from seawater ingress.
★ Coating to prevent chloride ion ingress & carbonation attack.
★ Excellent adhesion. Bonds to porous and non-porous surfaces.
★ Allows water vapour to escape from the structure.
★ Non-toxic and therefore suitable for contact

■ Technical Support
MUHU provides a comprehensive technical support service to specifiers, end users and contractors and is able to offer on-site technical assistance.

■ Instructions for Use
Surface Preparation:
Ensure that surfaces to be treated are free of dust, dirt, grease, oil and other foreign matter. Cut back spalled concrete until sound and make good with suitable repair mortars. If repairs have been carried out cure with water or suitable curing agents. On old concrete, remove all traces of conventional curing compounds and surface sealers prior to application.

Mixing: JS Waterproofing Coating is supplied as Part A and Part B. Using a clean container, slowly add the powder to the liquid component and mix with a slow speed drill fitted with a suitable mixing paddle. To achieve the required consistency and brushability add minimum quantity of water.

Mixing full units is recommended, however where required part units may be mixed providing close attention is paid to mixing ratios.

Part units may be required for filling surface imperfections prior to coating the concrete.

Application: Thoroughly dampen down the concrete surface with clean water prior to application. Ideal conditions are saturated surface dry (SSD). Do not apply to dry concrete. 

Whilst damp, apply JS Waterproofing Coating with a bristle brush or roller at the rate of 1.8 kg/m2. This is achievable in one coat on horizontal surfaces although two coats will ensure even coverage and remove pin holing. On vertical or overhead surfaces, two coats are required. Where more than one coat is required, the previous coat should be allowed to dry prior to subsequent applications. imperfections prior to coating the concrete.

Spray application may be suitable for larger areas; airless spray should be used with 3-4 mm nozzle sizes at 6-8 bar pressure. Trials should be conducted to finalize the best method for application. Ensure continuous supply of mixed product when adopting this method. Equipment should be thoroughly cleaned immediately after use with water. Hardened coating may only be removed mechanically.

At up stands and across joints, it is recommended that a geotextile mesh be imbedded in the coating. This will increase the physical properties and will aid distribution of localized stresses. The mesh should be applied as a sandwich between the first and second coats of JS Waterproofing Coating.


As JS Waterproofing Coating is moisture tolerant, it can be applied onto concrete that is only 24 hours old thereby giving immediate protection and curing. Where heavy depressions, cracks or blowholes are present, reduce the amount of gauging liquid in the mix to the desired consistency and carry out re-profiling. When used in tanking applications allow the coating to cure fully for 72 hours prior to water testing.

■ Coverage
Approximately 1.8 kg/m2 @ 1 mm thickness per coat and two coats required.

■ Packaging & Storage
JS Waterproofing Coating is supplied in 7.2 kg units as Part A & Part B and it has a minimum shelf life of 6 months provided it is stored under cover, out of direct sunlight.

■ Health & Safety Precautions
JS Waterproofing Coating does not fall into the hazard classifications of current regulations. However, it should not be swallowed or allowed to come into contact with skin and eyes. Suitable protective gloves and goggles should be worn. Splashes on the skin should be removed with water. In case of contact with eyes rinse immediately with plenty of water and seek medical advice. If swallowed seek medical attention immediately –do not induce vomiting.
For further information, refer to the Material Safety Data Sheet available for this product.

■ Important note
MUHU endeavors to ensure that the technical information contained herein is true, accurate and represents our best knowledge and experience. No warranty is given or implied, as MUHU has no control over the conditions of use and the competence of any labor involved in the application are beyond our control.

As all MUHU technical data sheets are updated on a regular basis it is the customer’s responsibility to check that the product is suitable for the intended application, and that the actual conditions of use are in accordance with those recommended.


    

Copyright 2013 | MUHU (China) Construction Materials Co., Ltd. All rights reserved.